To Select The Display Mode And Display Digits; To Change The Measurement Settings Display - Agilent Technologies 4349B Manual

4349B

To Select the Display Mode and Display Digits

Press . The display mode selection menu appears.
Select the desired mode using or ( :Measurement Data, :Comparator
results, :Display OFF). To exit the menu, select .
If you select , the display digits selection menu appears. Select the desired digits (3, 4, or
5) using or , and press . After selecting the display digits, the 4349B returns to
the display mode selection menu.

To Change the Measurement Settings Display

Each time is pressed, the display mode of the Measurement Settings area is changed as
follows:
1. Measurement range and Voltage value of the selected channel
2. Averaging rate and Trigger delay time
3. Upper comparator limit and Lower comparator limit of the selected channel
2-14 Operating the 4349B