Table of Contents
Advertisement
Function Overview
Names and Functions of Display Areas on the LCD Display
5. Sorting conditions
This area is used to set the sorting conditions for each bin. Four sorting conditions are
applied to each bin, and the components that meet all four of a bin's conditions are sorted
into that bin.
NOTE
The columns for only two sorting conditions are visible at one time in the bin sorting setup
display. To check the columns for the two hidden sorting conditions, use the horizontal
scroll bar or move the cursor until they appear.
6. OUT OF GOOD BINS line
This line can be placed at the desired BIN boundary. To position this line, choose the Bin
number (indicating the last Good Bin) from the "Out of Good Bins" sub-menu under the
tool bar's "Edit" menu. Components sorted into BINs below this line are judged as OUT
OF GOOD BINS. The OUT OF GOOD BINS judgment result can be confirmed when the
display color of the item "5. BIN sort result" on page 85 (in the single point measurement
display, Figure 4-5) changes to red. This signal is also output to the handler interface.
98
Chapter 4
Advertisement
Table of Contents
