Table of Contents
Advertisement
Learning Basic Operations
How to Set Measuring Conditions
Figure 3-7
Frequency of measurement point number 3 set to 100 MHz
Step 5. Press the
frequency of measurement point number 4 to 1 GHz (Figure 3-8).
Figure 3-8
Frequency of measurement point number 4 set to 1 GHz
Step 6. Press the
first single point measurement display (Figure 3-3 on page 53).
56
and
keys on the entry block of the front panel consecutively and set the
[1]
[G/n]
key on the measurement block of the front panel to go back to the
[Meas View]
Chapter 3
Advertisement
Table of Contents
