Table of Contents
Advertisement
Sorting According to Measurement Results
Example of Settings for BIN Sorting
Figure 8-26
Setting the BIN range mode for sorting into BIN 1 for Condition 1
Step 4. Set the upper limit measurement value for sorting into BIN 1 for Condition 2 by following
this procedure.
a. Click the BIN 1 UpperLimit cell in the Condition 2 column to select the cell.
b. Press the [1] key in the entry block on the front panel (Figure 8-27) and then press the
key to enter 1G as the upper limit value for Condition 2 of BIN 1.
[G/n]
Figure 8-27
Setting the upper limit value for Condition 2 of BIN 1
Chapter 8
199
Advertisement
Table of Contents
