Agilent Technologies Twelfth 4287A RF LCR Operation Manual page 299

Table B-2 Functions for manufacturing line
Different load reference values
Provision for
can be entered for different
multi-frequency
frequencies.
Max 13 bins
Bin setting is enabled by
combination of four conditions.
Comparator
- Bin sorting is enabled at each
point of multi-frequency
- Secondary parameters can be
bin-sorted simultaneously.
Supported
Resume
Statistical Supported
processing
GPIB I/F equipped
GPIB
ASCII, binary data
Measurement 4 orthogonal coordinate
parameters parameters
Table B-3 Calibration
O/S/L/LLC calibration
O/S compensation
Calibration/
Electrical length calibration
compensation
Without frequency interpolation
Read/write is enabled from an
external PC
Compensation 16195B (provision for high
kit frequency, Load, Low Loss C)
Table B-4 Other characteristics
About 18 GB HDD
Data storage
(user area)
1.44 MB FDD
GPIB, Handler I/F
Interface
LAN (10Base-T): Telnet, FTP
Appendix B
Differences from Agilent 4286A
2. Differences Between 4286A and 4287A Hardware
4287A
One fixed load reference value
Max 9 bins (only one frequency)
Go/No/Go decision for each list
sweep point
Supported only for
calibration/compensation data
Not supported
GPIB I/F equipped
ASCII, binary data
2 orthogonal coordinate
parameters
4287A
O/S/L/LLC calibration
O/S/L compensation
Electrical length calibration
With frequency interpolation
Read/write is enabled from an
external PC
16195A
4287A
256 kbyte SRAM
1.44MB FDD
GPIB, Handler I/F
4286A
4286A
4286A
299