Table of Contents
Advertisement
Activate the menu bar by pressing the
4287A and perform any of the following operations (or combined operations):
•
•
NOTE
You can release the state by again pressing the menu bar that was activated by pressing the
[Alt]
For the measurement display menu bar, despite whether one point measurement display or
list measurement display is shown, the function (menu contents) does not change
(common).
3. Table number
Displays the currently selected table number. The 4287A has eight tables that each allow a
maximum of 32 measurement points to be set. Use the "Measurement point setup display"
on page 91 to set the measurement point conditions (measurement frequency, averaging
factor, oscillator level for the measurement point number) for each table.
NOTE
To directly call up the table number selection softkey menu, use the mouse to click in the
table number area.
4. Measurement point number
Displays the currently selected measurement point number. Use the "Measurement point
setup display" on page 91 to set the measurement point conditions (measurement
frequency, averaging factor, oscillator level for the measurement point number) for each
table.
NOTE
To directly call up the measurement point number selection softkey menu, use the mouse to
click in the measurement point number area.
5. BIN sort result
When the BIN sort function is turned ON, the sorting result (BIN number) based on the
measurement results is displayed at this position. For the BIN sort function, see Chapter 8,
"Sorting According to Measurement Results," on page 171.
6. Measurement frequency
Indicates the measurement frequency of the currently selected measurement point. The
conditions (measurement frequency of measurement point, averaging factor, oscillator
level for the measurement point number) for the measurement points of each table are set
in "Measurement point setup display" on page 91.
Chapter 4
Names and Functions of Display Areas on the LCD Display
you can turn the rotary knob
press the rotary knob.
Enter the menu name number using the numeric entry keys (
keyboard to select the desired function.
Move the cursor on the menu using the arrow keys ([
keyboard and then press the
key on the front panel or keyboard.
instead of pressing the
[Alt]
key of the keyboard connected to the
↑]
,
[↓]
[Enter]
key to select the desired function.
Function Overview
keys and then
[0]
to
[9]
) of the
,
[←]
and
[→]
) of the
85
Advertisement
Table of Contents
