Setting Measurement Conditions
How to Set the Measurement Point
How to change oscillator level
Change the oscillator level of an already set measurement point by following these steps:
Step 1. Use the mouse to select the oscillator level cell at the measurement point you want to
change.
Step 2. Enter a new oscillator level by pressing the numeric entry keys of the entry block (
[9]
To set the oscillator level to -10 dBm, for example, press
then
Figure 5-8
How to change oscillator level
110
,
and
and
sequentially.
[-]
[.]
[×1]
.
[×1]
,
and
(Figure 5-8) and
[-]
[1]
[0]
Chapter 5
to
[0]