Overview Of Bin Sort Function - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Sorting According to Measurement Results

Overview of BIN Sort Function

Overview of BIN Sort Function
The BIN sort function of the Agilent Technologies 4287A is designed to determine, based
on the obtained measurement data, the BIN where a DUT (device under test) should be
placed according to the preset sorting conditions. By using this function, the result is
indicated on the display and signals are sent to the handler interface.
The BIN sort function can be used for two purposes: (1) for manual measurement (Figure
8-1), and (2) for automatic sorting by a handler (automatic sorter) (Figure 8-2).
Figure 8-1 Parts sorting by manual measurement
172 Chapter 8