Agilent Technologies Twelfth 4287A RF LCR Operation Manual page 100

Function Overview
4287A Key Operation Overview
Table 4-2 4287A key operation list
Operation
Change of unit
Execution of entry and
selection
*1. If you have selected the menu bar with the
*2. After selection, you can use the arrow keys to change the selected menu and menu item and the rotary knob to
change the selected menu item.
*3. The selected position refers to the highlighted menu name and cell on the display. Subsequent entry or selection
will apply to that position.
*4. In the menu bar, however, you can select the menu by pressing the key for the initial number (alphanumeric) of
the menu name heading. The same operation can be done for the numbered menu items within each menu.
*5. Normally, the function is executed simultaneously with the movement to the selected position (you need not press
the or other key).
100
Front panel
(Rotary knob)
(Arrow keys)
Turn clockwise
Press
or
counterclock-
wise
Press
Press
[Alt]
MEASURE-
MENT/INSTR
STATE/ENTRY
block keys
Press [G/n][M/μ]
[k/m] and [×1]
(also performs
execution of
entry)
key, then you can execute this function from a menu.
External device
Keyboard Mouse
Click on unit in
Press
[↑][↓]
drop down list
Press (Selection is
[Enter]
executed by
clicking on selected
item)
Chapter 4
*5