Setting Faulty Bin (Out Of Good Bins) - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Setting Faulty BIN (OUT OF GOOD BINS)

You can predetermine that BINs following the desired BIN number are faulty.
If a BIN is evaluated as faulty by BIN sorting, the result of OUT_OF_GOOD_BINS as
well as the BIN number is output to the handler interface.
Step 1. Click with the mouse "
Step 2. Click "
Step 3. From the sub-menu, click an item for the lowest-order good BIN.
For example, selecting "
to 13 as not good. A red dotted line is drawn on the boundary between the lowest good BIN
and the highest faulty BIN (Figure 8-13).
Figure 8-13 Setting BINs 4 and lower as faulty
Chapter 8
" on the menu bar.
2. Edit
" from the menu.
7. Out Of Good Bins
Out Of Good Bins: > Bin3
Sorting According to Measurement Results
Setting Faulty BIN (OUT OF GOOD BINS)
" sets BINs 1 to 3 as good and BINs 4
187