Table of Contents
Advertisement
Setting Measurement Conditions
How to Set the Measurement Point
How to specify table number for setup
The 4287A has eight tables that allow a maximum of 32 measurement points to be set. To
set the measurement point (or to set the calibration kit, compensation kit, or BIN sort), first
specify the table number by following the step below.
NOTE
For how to "select the menu from the menu bar" as described in this procedure, see "2.
Measurement display menu bar" on page 84.
Step 1. Select the
desired table number from the menu (
Figure 5-2
Selecting the measurement table from the menu bar
NOTE
Instead of using the menu bar, the measurement point table can also be selected by using
the mouse to click on the buttons at the bottom of the screen described in "8. Measurement
point table selection buttons" on page 92.
104
4. Table
menu from the menu bar at the top of the screen and then select the
to
) (Figure 5-2).
Table 1
Table 8
Chapter 5
Advertisement
Table of Contents
