Setting and Using the Control and Management Facilities
Configuring the Network
Step 5. The Local Area Connection Properties dialog box (Figure 11-3) appears. Select (highlight)
Internet Protocol (TCP/IP)
Figure 11-3).
Figure 11-3
Local Area Connection Properties dialog box
Step 6. The Internet Protocol (TCP/IP) Properties dialog box (Figure 11-4) appears. Click (select)
Use the following IP address
11-4), the subnet mask (3 in Figure 11-4), and the gateway address (4 in Figure 11-4).
If the IP address can be obtained automatically (if the DHCP server can be used), click
(select)
Figure 11-4
Internet Protocol (TCP/IP) Properties dialog box
230
(1 in Figure 11-3) and then click the
(1 in Figure 11-4) and then enter the IP address (2 in Figure
Obtain an IP address automatically
Properties
(5 in Figure 11-4).
button (2 in
Chapter 11