Table of Contents
Advertisement
Installation Guide
Setting the Internal Clock
Figure 2-24
Date/Time Properties Dialog Box ("Time Zone" Tab)
Step 3. Turn the rotary knob (
press the
NOTE
When you select the time zone for summer time, the
daylight saving changes
making summertime adjustment to ON, turn the rotary knob (
Automatically adjust clock for daylight saving changes
(
Step 4. Turn the rotary knob (
press the
Step 5. By referring to Figure 2-23, turn the rotary knob (
to the desired item. Press the
Step 6. Turn the rotary knob (
press
Turning the Date/Time Display ON and OFF
The Date/time is displayed within the instrument status bar at the lower right of the display
screen.
Step 1. Press the
focus to the
key, move the focus to the
focus to the
on/off.
44
) on the front panel to point the focus to the
/
or
/
key to select the time zone.
[←]
[→]
[↓]
[↑]
box becomes selectable. To set the function of automatically
) to display the √ mark (Figure 2-24).
) on the front panel to point the focus to the
key to move the focus to the
[←]
[←]
) on the front panel to point the focus to the
key.
[Enter]
key in the INSTR STATE block. Press the
[System]
Misc Setup
button and then press the
Clock Setup
button and press the
Show Clock
Automatically adjust clock for
tab.
Date & Time
) on the front panel to point the focus
/
[→]
or
[↓]
/
[↑]
key to set each item.
[Enter]
button, and press the
key to set the date/time display
[Enter]
box and
Time Zone
) to point the focus to the
box and press the rotary knob
tab and
Time Zone
button and then
OK
or
key to move the
[↓]
[↑]
or
[→]
key. Press the
[↓]
or
or
key. Point the
[Enter]
[→]
Chapter 2
[↑]
Advertisement
Table of Contents
