How to change averaging factor
Change the averaging factor of an already set measurement point by following these steps:
Step 1. Use the mouse to select the averaging factor cell at the measurement point you want to
change.
Step 2. Enter a new averaging factor by pressing the numeric entry keys of the entry block (
[9]
) and
To set the averaging factor to "10," for example, press
Figure 5-7
How to change the averaging factor
Chapter 5
[×1]
) sequentially.
Setting Measurement Conditions
How to Set the Measurement Point
[1]
and
[0]
(Figure 5-7)and then
[0]
to
[×1]
.
109