Agilent Technologies Twelfth 4287A RF LCR Operation Manual page 25

Figure 2-5 How to remove trim strips from sides
Step 3. Use the included screws to mount the two rack-mounting flanges (locking side plates) on
the sides of the Agilent 4287A front panel frame.
Figure 2-6 How to install rack-mounting flanges (locking side plates) on front panel
Step 4. Remove the four bottom feet and two tilt stands.
NOTE
Do not detach the four feet from the rear panel.
Chapter 2
How to Install Front Handles/Rack Mounting Flanges
Installation Guide
25