Calibration And Compensation Procedures Using Dedicated Test Fixture - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Calibration and Compensation

Calibration and Compensation Procedures Using Dedicated Test Fixture

Calibration and Compensation Procedures Using Dedicated
Test Fixture
The following describes the calibration and compensation procedures to measure the DUT
by connecting the Agilent 4287A test head to a dedicated test fixture (e.g. Agilent 16196A)
with a 3.5-mm-to-7-mm adapter and a test fixture stand, as illustrated in Figure 6-3.
Figure 6-3 Measuring a DUT with dedicated test fixture directly coupled to test head
120 Chapter 6