Table of Contents
Advertisement
Sorting According to Measurement Results
Setting BIN On and Off
Setting BIN On and Off
In the presetting, all BINs are off (inactive), and the BIN is regarded as non-existent. This
requires the BIN to be turned on (activated) either before or after setting the BIN range to
make the new settings active. You can set the condition of a specific BIN and then turn it
off temporarily. After that you can turn it on whenever required (the setting of the BIN
range is not affected by turning the BIN on and off).
Step 1. Click with the mouse the ON/OFF button just below the BIN name button in the leftmost
column of the BIN Sort setup table to turn the BIN on and off.
Figure 8-12
Example of BIN 1 turned on
186
Chapter 8
Advertisement
Table of Contents
