Lan Connection - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Installation Guide

LAN Connection

LAN Connection
Step 1. Make the appropriate settings on the 4287A for connecting to a Local Area Network
(LAN) according to "Configuring the Network" on page 228.
Step 2. Connect the Agilent 4287A to the LAN according to Figure 2-12.
NOTE
Before connecting to the LAN, be sure to perform the correct LAN settings on the 4287A.
If the appropriate LAN settings are not made, damage to the network could occur when
connecting to the LAN.
Figure 2-12 LAN Connection
30 Chapter 2