Printing Out Measurement Results and Internal Data on a Printer
Procedure for Printing
Follow this procedure to print out the screen information on a printer.
1. Selecting the contents to be printed
Step 1. To print a screenshot of the information shown on the LCD display, display the screen that
you want to print.
Step 2. Press
on the front panel (
[Display]
At this point, the displayed image data are copied to the clipboard (internal temporary
memory). At the same time, the Display softkey menu appears.
Step 3. Turn the rotary knob
. Then press
PRINT MENU
Step 4. Turn the rotary knob
CONTENT [ ]
. Then press
selection in order).
Softkey Label
CONTENT [SCREEN]
CONTENT [SETUP]
CONTENT [LIST]
2. Setting the image format
If
CONTENT [SCREEN]
format is set by following this procedure.
Step 1. Turn the rotary knob
. Then press
IMAGE [ ]
order).
316
is imprinted on the front panel above the key).
Capture
on the front panel to move the cursor in the softkey menu to
to display the PRINT MENU softkey menu.
on the front panel to move the cursor in the softkey menu to
to select the content to be printed (each press switches the
Printed Content
Image copied to the clipboard.
Contents (measurement point setup table,
calibration kit table, BIN sort setup table)
of the selected measurement point table
(active table).
List of the parameters for each
measurement point displayed on the list
measurement display.
is selected in "1. Selecting the contents to be printed", the image
on the front panel to move the cursor in the softkey menu to
to select the image format (each press switches the selection in
Appendix E