Agilent Technologies Twelfth 4287A RF LCR Operation Manual page 169

screen regardless of which command is executed.
2. The display time is much shorter for the list measurement display than for the single
point measurement display
3. The display time becomes shorter as the number of display parameters decreases.
4. If possible, set the screen display to not perform updates (UPDATE:OFF). This
minimizes the time needed to update the screen. For more details, refer to Table 12-4.
Table 7-3 Required measurement conditions and recommended settings
measurement
parameters
Measurement
results only
Measurement
results only
Chapter 7
Required measurement
conditions
Required GPIB
command(s)
display
None Send or None
All Send
All None
Send
None
Executing Measurements and Displaying Results
Turning ON/OFF Update the LCD Display View
Recommended settings for shortest
measurement time
Screen Display mode
display
(DISP)
OFF Not relevant
ON List
measurement
ON List
measurement
ON List
measurement
ON List
measurement
Screen
display
update
(UPDATE)
Not relevant
ON
ON
OFF
OFF
169