Setting Ip Address - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Step 5. When switching from disable to enable:
Double-click the Local Area Connection icon (1 in Figure 11-2) in the Network and
Dial-up connections window to enable the network connection function.
Step 6. Click the × button (2 in Figure 11-2) in the upper right of the Network and Dial-up
Connections window.

Setting IP address

Follow these steps to set the IP address:
Step 1. Press .
Step 2. Press .
LAN Setup
Step 3. Press
Network Configuration
Step 4. Double-click the Local Area Connection icon (1 in Figure 11-2) in the Network and
Dial-up Connections window. The Local Area Connection Status dialog box appears.
Chapter 11
Setting and Using the Control and Management Facilities
.
Configuring the Network
229