Show The Routing Table - Digi IX14 User Manual

Routing
---------------------------------------------------------------------
----------
ecmp
enable
Additional Configuration
---------------------------------------------------------------------
----------
interface
neighbour
redis
timer
(config)>
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show the routing table

To display the routing table:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX14 User Guide
false Allow ECMP
true Enable
Interfaces
Neighbours
Route redistribution
Timers
Show the routing table
723