Chapter 3 Configuring Clients (Mqtt Publisher, Mqtt Subscriber); Configuring Settings With Gx Works3; Procedure For Setting Parameters - Mitsubishi Electric MELSEC iQ-F Series Quick Start Manual

3
CONFIGURING CLIENTS (MQTT PUBLISHER,
MQTT SUBSCRIBER)
This chapter describes the setting items for the clients (MQTT Publisher, MQTT Subscriber).
3.1

Configuring Settings with GX Works3

This section describes how to configure the settings with GX Works3.

Procedure for setting parameters

1.
Open the "Navigation" window  [Module Configuration]. Drag and drop [FX5-ENET] to add it.
Drag and drop
2.
Double-click [FX5-ENET] on [Module Configuration]. Click the [Yes] button.
3.
Click the [Setting Change] button.
3 CONFIGURING CLIENTS (MQTT PUBLISHER, MQTT SUBSCRIBER)
3.1 Configuring Settings with GX Works3
3
12