4.7
Initializing the CPU Module
Initialize the CPU module.
[Online] [CPU Memory Operation]
Procedure
4.8
Setting Parameters
Set system parameters and parameters for each module.
When the engineering tool is connected to the actual system
Set parameters by loading an actual system configuration to the Module Configuration window of the engineering tool.
[Navigation window] [Module Configuration]
■Precautions
The RQ extension base units, MELSEC-Q series extension base units, and modules mounted on those base units cannot be
loaded. For those cannot be loaded, select the units and modules on the Element Selection window, and drag and drop them
to the system configured on the Module Configuration window.
1.
Select "Data Memory" on the "Memory Management" window, and
click the [Initialization] button.
2.
Select "File Storage Area", and click the [Initialization] button.
3.
After the initialization processing completes, click the [Close]
button.
1.
Open the Module Configuration window, and select [Online]
[Read Module Configuration from PLC] on the menu bar.
2.
Click the [Yes] button when the window for adding module labels of
the mounted modules appears.
3.
The system parameters are automatically set, and the actual
system configuration is displayed on the Module Configuration
window.
4.
Double-click each module (CPU module, I/O module, or intelligent
function module) to display the corresponding module parameter
editor.
5.
Set parameters, and click the [Apply] button to close the window.
4 START-UP PROCEDURE
4.7 Initializing the CPU Module
4
43