Loading Roll Media - ENCAD Croma 24 Getting Started

Croma24 Getting Started for Macintosh

5. Loading roll media

5. Loading roll media
Handle your media carefully to avoid wrinkles or
creases. Because the media can absorb skin oils, it's
a good idea to wear light cotton gloves when han-
dling the media to prevent unwanted fingerprints in
the printed piece.
1. If the green light
button to turn the printer on.
2. Position the roll so the media feeds over the top
of the roll.
3. Facing the front of the printer, position the roll
media onto the roll guide marked "R" and slide
the other roll guide until it fits into the roll media
core.
4. Insert the media through the slot at the back of
the printer, aligning it with the guide line on the
back of the printer. Be sure the edge of the
media touches pinch rollers evenly.
5. Press the Load Media button
4
is not on, press the Power
.