Table of Contents
Advertisement
Main Menu
Timing Belt
Removal (cont'd)
7. Remove the breather hose and the air cleaner hous-
ing (see page
6-25 ('91-'93)
8. Disconnect the alternator connector and the termi-
nal.
9. Remove the cover, adjusting bolt, the mounting bolt
and mounting nut, then remove the alternator belt
and the alternator.
6 x 1.0 mm
12 N·m (1,2 kg-m,
9 Ib-ft)
ADJUSTING
BOLT
MOUNTING NUT
10 x 1.25 mm
45 N·m (4.5 kg-m,
33 Ib-ft)
10. Remove the cylinder head covers.
Refer to page
6-47 ('91-'93)
11. Remove the two bolts from the side engine mount
near the alternator bracket. Pivot the mounting bracket
into the housing of the body.
12 x 1.25 mm
73 N·m (7.3 kg-m, 53 Ib-ft)
Replace.
CORROSION RESISTANT BOLT
Table of Contents
or
('94-'96)
)
COVER
MOUNTING BOLT
10 x 1.25 mm
45 N·m (4.5 kg-m,
33 Ib-ft)
ALTERNATOR
BELT
or
('94-'96)
when installing.
12 x 1.25 mm
95 N·tn (9,5 kg-m,
69 Ib-ft)
12. Remove the transmission mount (see page
or
('94-'96)
transmission mount
13. Install a brace under the engine, then tilt the engine
approximately 5 using a jack.
NOTE: Make sure to place a cushion between the
oil pan and the jack.
14. Remove the alternator bracket stiffener and dipstic
pipe.
ALTERNATOR BRACKET
STIFFENER
8
1.25 mm
x
22N·m
(2.2 kg-m,
16 lb-ft!
10 x 1.25 mm
45 N·m (4.5 kg-m,
6 x 1.0 mm
33 Ib-ft!
12N·m (1.2 kg-m, 9 Ib-ft)
5-10 ('91-'93)
DIPSTICK PIP
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
