Acura NSX 1991 Manual page 348

Main Menu
Transmission
Reassembly
5. Install the spring washer, then insert the mainshaft
and countershaft into the shift forks and install
them as an assembly.
NOTE: Tape the mainshaft splines before instal-
lation.
MAINSHAFT
ASSEMBLY
SPRING WASHER
6. Install the change holder assembly in the clutch
housing.
NOTE: Place the interlock finger in the groove of
the select arm.
SELECT
ARM
Table of Contents
COUNTERSHAFT
ASSEMBLY
SHIFT FORK
ASSEMBLY
Tape the main-
shaft splines.
6 x 1.0 mm SPECIAL BOLTS
15 N-m (1.5 kg-m, 11 Ib-ft)
CHANGE HOLDER
ASSEMBLY
INTERLOCK FINGER
7. Lift the mainshaft assembly, then install the
reverse idle gear shaft assembly with the spring pin
matching the groove of the clutch housing.
REVERSE IDLE GEAR
SHAFT ASSEMBLY
SPRING PIN
GROOVE
8. Shift the reverse synchro sleeve to the driven gear
side. Lift the mainshaft assembly and reverse idle
gear shaft assembly, then install the reverse shift
fork assembly.
REVERSE SHIFT FORK
ASSEMBLY