Acura NSX 1991 Manual page 849

Main Menu
Rear Side Marker Lights
Replacement
1. Carefully pry the rear side marker light out of the rear
fender. Be careful not to damage the rear parking
light or the rear fender.
Pry out here.
REAR
BUMPER
PROTECTIVE CLOTH
2. Disconnect the 2-P connector from the rear side mar-
ker light.
SOCKET
HOUSING
BULB (3CP)
3. Turn the bulb socket 45° counterclockwise to re-
move it from the rear side marker light.
Table of Contents
REAR SIDE
MARKER
LIGHT
2-P CONNECTOR
License Plate Lights
Replacement
1. Remove the eight screws, and disconnect the 4-P
connector.
LICENSE PLATE
LIGHT
REAR BUMPER
2. Turn the bulb socket 45° counterclockwise to re-
move it from the housing.
3. If necessary, separate the lens from the housing by
removing the two screws.
4-P
CONNECTOR
SOCKET
BULB (8W)
HOUSING