Acura NSX 1991 Manual page 873

Main Menu
Dash Lights Brightness Control
Controller Test
1. Remove the dash lights brightness controller from
the instrument panel (see previous page).
2. Measure resistance between A and B terminals
while rotating the adjusting dial. Resistance should
vary from 0 to 20,000 ohms as the dial is rotated.
NOTE: Resistance will vary slightly with temperature.
HEADLIGHT
RETRACTOR SWITCH
Dash lights brightness controller
Table of Contents
ADJUSTING
DIAL
DASH LIGHTS
BRIGHTNESS
CONTROLLER
Controller Light Bulb Replacement
1. Remove the dash lights brightness controller.
2. Turn the socket 45° counterclockwise to remove it.
BULB (0.84W)