Main Menu
Security Alarm System
Indicator Replacement
1. Remove the door panel (see
2.
Remove the two screws from the indicator.
3.
Remove the indicator from the door panel.
5-P CONNECTOR
Table of Contents
section
20).
INDICATOR
DOOR PANEL
Trunk Key Cylinder Switch Test
1.
Open the trunk lid and remove the trunk rear panel.
2.
Disconnect the 2-P connector from the trunk key
cylinder switch.
3.
Check continuity at the switch connector terminals.
• There should be continuity between the terminals
when the trunk lock is turned to UNLOCK with
the key.
• There should be no continuity when the lock is
released.
TRUNK KEY
CYLINDER SWITCH
TRUNK KEY
CYLINDER
2-P
CONNECTOR