Acura NSX 1991 Manual page 383

Main Menu
2. Install the standard shim and bearing outer race in-
to the transmission housing using the special tools
as shown.
CAUTION: Do not use more than one shim to ad-
just the bearing preload.
NOTE:
• Install the bearing outer race squarely.
• Check that there is no clearance between the
bearing outer race, shim, and transmission
housing.
DRIVER
07749-0010000
BEARING
OUTER
RACE
Table of Contents
ATTACHMENT
72 x 75 mm
07746-0010600
75 mm THRUST
SHIM
75 mm THRUST SHIM:
3. Lubricate the tapered roller bearing with transmis-
sion fluid, then install the differential.
4. Install the transmission housing.
NOTE: Do not install the mainshaft, countershaft,
reverse idle gear shaft, and secondary shaft.
Torque: 55 N-m (5.5 kg-m, 40 Ib-ft)
5. Rotate the differential assembly in both directions
to seat the bearings.