Table of Contents
Advertisement
Main Menu
Table of Contents
Rear Damper
Installation
1.
Reposition the damper assembly between the
frame and knuckle.
2.
Install the stabilizer link and connect the stabilizer
bar.
3.
Loosely install a new self-locking nut.
4.
Hold the ball pin of the stabilizer link with a hex
wrench, then tighten the self-locking nut.
5.
Loosely install a new damper mounting nut.
NOTE: The damper mounting nuts should be
tightened with the damper under vehicle load.
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
