Acura NSX 1991 Manual page 10

Main Menu
Lift and Support Points
Floor Jack
CAUTION: Place a rubber pad between the lift platform and the center support point to avoid damaging the car. The
lift platform must contact the support point only; it must not come in contact with any other part of the car.
1. Set the parking brake, and block the wheels that are
not being lifted.
2. When lifting the rear of the car, put the gearshift
lever in reverse (Automatic in
3. Raise the car high enough to insert the safety stands.
4. Adjust and place the safety stands as shown on page
1-11 so the car will be approximately level, then low-
er the car onto them.
• Always use safety stands when working on or un-
der any vehicle that is supported by only a jack.
• Never attempt to use a bumper jack for lifting or
supporting the car.
CENTER SUPPORT
POINT
Table of Contents
position).
RUBBER PAD
RUBBER PAD
LIFT PLATFORM
CENTER
SUPPORT POINT
FLOOR JACK