Main Menu
Engine Removal/Installation
Removal
20. Disconnect the engine wire harness connectors.
21. Remove the battery cable from the main fuse box.
BATTERY
CABLE
22. Disconnect the throttle body 6P connector, and
remove the ground cable and starter cable.
STARTER CABLE
GROUND CABLE
CORROSION RESISTANT BOLT
Table of Contents
ENGINE WIRE
HARNESS CONNECTORS
6 x 1.0 mm
10 N-m (1.0 kg-m,
7 Ib-ft)
THROTTLE BODY
6P CONNECTOR
23. Disconnect the two connectors from the emission
control box, then remove the control box.
• Do not disconnect the vacuum hoses.
6 x 1.0 mm
10 N-m (1.0 kg-m, 7 Ib-ft)
CONNECTORS
CONTROL BOX
24. Remove the radiator hoses and heater hose.
HEATER HOSE
RADIATOR
HOSES