Acura NSX 1991 Manual page 421

Main Menu
Diagnostic Trouble Code (DTC) Indication
1. Connect the SCS service connector to the service check connector under the glove box.
SCS SERVICE CONNECTOR
07PAZ - 0010100
2. Turn the ignition switch ON (II), but do not start the engine.
3. Record the blinking frequency of the EPS indicator light. The blinking frequency indicates the diagnostic trouble code
(DTC).
NOTE: Check the DTC carefully and record it. The memory of the DTC is erased if the connector is disconnected from
the EPS control unit.
GAUGE ASSEMBLY
Table of Contents
SERVICE CHECK
CONNECTOR (2P)
EPS INDICATOR LIGHT
17-23