Acura NSX 1991 Manual page 463

Main Menu
Front Suspension
Hub Replacement
3. Separate the wheel bearing from the hub using the
special tools and a press.
CAUTION: Hold onto the hub to keep it from fall-
ing when pressed clear.
HUB DIS/
ASSEMBLY BASE
07GAF-SD40700
4. Remove the outboard bearing inner race from the
hub as shown.
INNER RACE
Replace.
NOTE: Wash the bearing and hub thoroughly in
high flash point solvent before reassembly.
Table of Contents
Press
WHEEL
BEARING
Replace.
Press
NOTE: Replace the bearing with a new one after
removal.
5. Press a new wheel bearing into the hub using the
special tools shown and a press.
HUB ASSEMBLY
DRIVER ATTACHMENT
07GAF-SD40200
6. Install the pulser.
NOTE: Be sure the pulser engages with the pin on
the spindle.
Press
SUPPORT BASE
07965 - SD90100
PULSER