Main Menu
Condenser
Overhaul
1.
Remove the four bolts and nuts. Then separate the condenser duct from the condenser shroud, and remove the
condenser.
2.
Remove the three mounting screws, then remove the condenser fan from the condenser shroud.
CONDENSER
DUCT
NUTS
6 x 1.0 mm
10 N-m (1.0 kg-m, 7 Ib-ft)
CONDENSER FAN
3.
Assemble the condenser in the reverse order of disassembly. Be careful not to damage the tabs on the condenser
shroud when you attach it to the air intake duct.
Table of Contents
CONDENSER
New parts (R-134a)
CONDENSER
SHROUD
SPACER
BOLT
SCREW