Acura NSX 1991 Manual page 432

Main Menu
Steering Column
Removal
8. Remove the combination switch assembly from the
column shaft.
NOTE: The combination switch can be removed by
disconnecting only the TCS sensor connector.
COMBINATION SWITCH
ASSEMBLY
9. Remove the steering joint cover.
STEERING JOINT COVER
Table of Contents
COLUMN SHAFT
CLIP
CLAMPS
10. Remove the steering joint bolts and toothed lock
washers from the steering joint.
STEERING JOINT BOLTS
11. Disconnect the ignition switch connectors and
remove the column holder, then remove the steer-
ing column assembly by removing the 8 mm bolts
and flange nuts.
STEERING
COLUMN ASSEMBLY
COLUMN
HOLDER
8 mm BOLTS
STEERING JOINT
TOOTHED
LOCK WASHERS
8 mm FLANGE NUTS