Acura NSX 1991 Manual page 918

Main Menu
Motor Test
CAUTION: Be careful not to damage the seats, the
interior trim or the body.
1. Remove the power seat, then disconnect the 2-P
connector from the slide motor.
2. Remove the two screws, then remove the power
seat switch from the power seat.
3. Disconnect the 5-P connector from the power seat
switch (recline switch side).
SLIDE
MOTOR
2-P CONNECTOR
Table of Contents
View from
wire side
RECLINE
MOTOR
5-P CONNECTOR
View from
wire side
4. Test motor operation.
CAUTION: When the motor stops running, discon-
nect power immediately.
FORWARD
SLIDE: Connect battery power to the No. 6
terminal and ground to the No. 7
terminal.
BACKWARD
SLIDE: Connect battery power to the No. 7
terminal and ground to the No. 6
terminal.
FORWARD
RECLINE: Connect battery power to the No. 4
terminal and ground to the No. 1
terminal.
BACKWARD
RECLINE: Connect battery power to the No. 1
terminal and ground to the No. 4
terminal.
NOTE: If a motor does not run, reverse the power
and ground connections. If the motor still does not
run, the motor or the wire harness is faulty.