Table of Contents
Advertisement
Main Menu
6.
Measure the caster on the both sides, and adjust the
caster to specifications.
Caster:
•
Loosen the pivot adjuster mounting nuts (self-
locking nuts) under the compliance pivot, and
adjust the caster by turning the adjusting cam.
SELF-LOCKING
NUT
Replace.
85 N-m
(8.5 kg-m, 61 Ib-ft)
7.
Remeasure and, if necessary, adjust the camber and
toe on the left side first, then the right side.
Front Specifications
Toe-out: 3.5 ± 1.0 mm (0.14 ± 0.04 in)
Camber: -0° 20' ± 30'
Caster:
8° 00' ± 45'
Table of Contents
ADJUSTING CAM
Corrosion resistant bolt/nut
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
