Acura NSX 1991 Manual page 299

Main Menu
6. Install the release bearing on the pressure plate.
7. Install the pressure plate.
NOTE:
Align the mark on the mid plate with the mark on
the pressure plate.
After installing, make sure the release bearing is
secure.
Align the marks.
RELEASE BEARING
PRESSURE PLATE
(P/N 08798-9002)
RELEASE
BEARING
Place the diaphragm spring fingers
in the groove of the release bearing.
Table of Contents
PRESSURE PLATE
8. Torque the mounting bolts in a crisscross pattern
as shown. Tighten them several steps to prevent
warping the diaphragm spring.
NOTE: Place the diaphragm spring fingers in the
groove of the release bearing.
9. Remove the special tools.
10. Initialize the mid plate guides (see page
('93-'96), 12-16 ('91-'92 Models).
MOUNTING BOLT
8 x 1.25 mm
22 N·m (2.2 kg-m, 16 Ib-ft)
12-14