Acura NSX 1991 Manual page 87

Main Menu
Crankshaft Pulley and Pulley Bolt
Replacement
When installing and tightening the pulley, follow the procedure below.
Clean, remove any oil and lubricate points shown below.
Clean
Remove any oil
Lubricate
WASHER
PULLEY BOLT
Crankshaft pulley bolt size and torque value:
16 x 1.5 mm
250 N-m (25.0 kg-m, 181 Ib-ft)
NOTE:
• Do not use an impact wrench when installing.
• Make sure the handle thumb screw aligns with the hole in the attachment.
HOLDER HANDLE
07JAB - 001020A
TORQUE WRENCH
Table of Contents
CRANKSHAFT
PULLEY
TIMING BELT
GUIDE PLATE
M/T: HOLDER ATTACHMENT, 45 mm
07NAB - 001030A
A/T: HOLDER ATTACHMENT, 50 mm
07NAB - 001040A
SOCKET, 19 mm
07JAA - 001020A
or (Commercially available)
TIMING BELT
DRIVE PULLEY
TIMING BELT
GUIDE PLATE
CRANKSHAFT