Acura NSX 1991 Manual page 364

Main Menu
7. Install the washer, thrust needle bearing, 65 mm
shim, 112 mm shim, clutch disc, and spring plate.
NOTE:
• Be careful not to move the plastigauge when in-
stalling the washer.
• Position the 65 mm shim with the thickness
stamp mark facing up.
Align the marks, then install the differential housing
cover.
Table of Contents
SPRING
PLATE
CLUTCH
DISC
112 mm SHIM
65 mm SHIM
THRUST NEEDLE
BEARING
WASHER
DIFFERENTIAL HOUSING
COVER
MARK
MARK
9. Tighten the mounting bolts in a crisscross pattern
in several steps.
BENCH
VISE
10. Remove the parts shown below.
8 x 1.0 mm SPECIAL BOLTS
40 N-m (4.0 kg-m, 29 Ib-ft)
DIFFERENTIAL
INSPECTION TOOLS
07MAJ-PR90100
DIFFERENTIAL
HOUSING
COVER
SPRING PLATE
CLUTCH DISC
112 mm SHIM
65 mm SHIM
THRUST NEEDLE
BEARING
WASHER