Main Menu
Cigarette Lighter
Relay Test
1.
Remove the glove box (see
2.
Disconnect the 4-P connector from the cigarette
lighter relay (wire colors of 4-P connector: BLU/
GRN, YEL/RED, BRN/YEL, BLK).
3.
Check continuity at the relay terminals.
• There should be continuity between the C and D
terminals.
• There should be continuity between the A and B
terminals when power and ground are connected
to the C and D terminals.
• There should be no continuity between the A
and B terminals when power is disconnected.
Table of Contents
section
20).