Acura NSX 1991 Manual page 674

Main Menu
Engine Cover/Roof Cover
Replacement
NOTE:
• Take care not to scratch the body.
• Open the rear hatch.
Roof cover (Engine cover) removal:
1. Open the roof cover, remove the nuts, then remove
the roof cover.
Nut locations, 4
6 x 1.0 mm
10 N-m (1.0 kg-m,
7.2 Ib-ft)
ROOF COVER
NOTE: After installing the roof cover, adjust the
roof cover latch by using shims to make the roof
cover lock securely (see page 20-113).
2. If removing the engine cover, remove the ground
wire, disconnect the roof holder switch connector,
then detach the harness clip from the left side (see
page 20-111). Remove the nuts, then remove the
engine cover.
Table of Contents
STRIKER
ROOF COVER
LATCH
Nut locations, 4
NUTS
6 x 1.0 mm 10 N-m
(1.0 kg-m, 7.2 Ib-ft)
3. Installation is the reverse of the removal procedure.
NOTE: Make sure the roof cover opens properly and
locks securely.
ENGINE COVER
ENGINE
COVER
HINGE