Acura NSX 1991 Manual page 842

Main Menu
Lighting System
Retractor Relay Test
1. Remove the retractor relay (located at the right side
of the front compartment area).
2. Check continuity at the relay terminals.
• There should be continuity between the E and F
terminals and between the B and C terminals.
• There should be continuity between the A and C
terminals when power and ground are connect-
ed to the E and F terminals.
• There should be no continuity between the A and
C terminals when power is disconnected.
Table of Contents
1.
2.
Retractor Cut/Taillight Relay Test
Remove the retractor cut relay and taillight relay.
Check continuity at the relay terminals.
• There should be continuity between the C and D
terminals.
• There should be continuity between the A and B
terminals when power and ground are connect-
ed to the C and D terminals.
• There should be no continuity between the A and
B terminals when power is disconnected.