Acura NSX 1991 Manual page 431

Main Menu
Steering Column
Removal
SRS components are located in this area. Review the
SRS component locations, precautions, and procedures
in the SRS section 24
vice.
1. Disconnect both the negative cable and positive
cable from the battery.
2. Remove the airbag assembly and steering wheel
from the column (see page 17-45).
3. Remove the dashboard lower panel, dashboard
lower pad, and dashboard brace.
4. Disconnect the connector between the cable reel
and the SRS main harness, then remove the con-
nector holder.
5. Remove the column lower panel.
SRS MAIN HARNESS
(YELLOW)
CONNECTOR HOLDER
Table of Contents
before performing repairs or ser-
DASHBOARD
BRACE
DASHBOARD LOWER
PAD
DASHBOARD
LOWER PANEL
COLUMN
LOWER PANEL
CABLE REEL
3P CONNECTOR
(YELLOW)
6. Remove the column covers.
NOTE: Be careful not to damage the column covers.
7. Disconnect the TCS sensor connector.
TCS SENSOR
UPPER COLUMN COVER
LOWER
COLUMN
COVER
TCS SENSOR CONNECTOR
(GREEN)