Acura NSX 1991 Manual page 422

Main Menu
Diagnostic Trouble Code (DTC) Indication
Example:
EPS Indicator light ON
EPS Indicator light OFF
Connect the SCS
service connector switch ON (II)
• The DTC is indicated by a series of long and short blinks. One long blink equals 10 short blinks.
Add the long and short blinks together to determine the DTC.
• The DTCs are repeated sequentially beginning with the lowest number.
4. Remove the SCS service connector.
NOTE: The Malfunction Indicator Lamp (MIL) will stay on after the engine is started if the SCS service connector is
connected.
5. Remove the CLOCK (7.5 A) fuse in the under-hood fuse/relay box for more than 10 seconds to erase the EPS control
unit memory.
Table of Contents
DTC Indication Pattern:
1.3 seconds
DTC: 11
Turn the ignition
0.36 seconds
DTC: 12
0.28 seconds
1.3 seconds
Repeat