Acura NSX 1991 Manual page 322

Main Menu
5. Measure the clearance between the shift fork, the
5th/reverse shift piece and shift piece.
Standard: 0.2-0.5 mm
(0.008-0.020 in)
Service Limit: 0.6 mm (0.024 in)
3RD/4TH
SHIFT FORK
5TH/REVERSE
SHIFT PIECE
6. If the clearance exceeds the service limit, measure
the width of the shift piece.
Standard: 11.9 - 12.0 mm (0.469-0.472 in)
SHIFT PIECE
If the width of the shift piece is less than the stan-
dard, replace the shift piece with a new one.
If the width of the shift piece is within the standard,
replace the 5th/reverse shift piece or shift forks
with a new one.
Table of Contents
1ST/2ND SHIFT FORK
SHIFT PIECE