Acura NSX 1991 Manual page 378

Main Menu
Differential
Reassembly
1. Install the clutch disc, clutch plate, central gear,
and carrier assembly.
NOTE: Lubricate the clutch disc surface with
transmission fluid.
2. Install the final driven gear.
NOTE: Align the mark on the differential housing
cover with the mark on the final driven gear.
Table of Contents
CARRIER ASSEMBLY
CENTRAL GEAR
CLUTCH PLATE
CLUTCH DISC
DIFFERENTIAL
HOUSING
COVER
FINAL
DRIVEN
GEAR
MARK
MARK
3. Install the 102 mm washer, clutch discs, clutch
plates, and 112 mm thrust shim.
NOTE:
• Lubricate the clutch discs with transmission fluid.
• Position the 112 mm thrust shim with the
thickness size mark facing away from the clutch
discs.
Thickness Size
Mark
CLUTCH PLATES
4. Install the 60 mm washer, spring plate, and stopper
plate.
112 mm THRUST
SHIM
CLUTCH DISCS
102 mm WASHER
STOPPER PLATE
SPRING PLATE
60 mm WASHER
DIFFERENTIAL
HOUSING